2/26/2023 0 Comments Audio overload v2.0![]() ![]() Registration port (Default 5060): The communication port used on the failover registrar.Ġ = Do not send SIP Subscribe for MWI 1 = Send SIP Subscribe for MWI Registration server: Enter the IP address or the (fully qualified) DNS name of the failover registration server. SIP servers can be identified by DNS using different queries. Redundancy - DNS query: VoIP providers provide SIP server redundancy for load balancing and service reliability. Secure Real Time Protocol: Security (RTP) is activated for voice connections.Ġ = Do not accept non-SRTP calls 1 = Accepts non-SRTP callsĪccept non-SRTP calls: Insecure calls are accepted even when SRTP is activated.Ġ = A 1 = SRV + A 2 = NAPTR (NAPTR + SRV + A) Registration refresh time (Default 180): Enter the time intervals (in seconds) at which the phone should repeat the registration with the VoIP server (SIP proxy)Ġ = SIPS disabled (Default) 1 = SIPS enabledĠ = SRTP disabled (Default) 1 = SRTP enabled Registration server port (Default 5060): Enter the communication port used on the registrar. Registration server: The registration server assigns the public IP address/port number that was used by the phone on registration to your SIP address - 65535 Proxy server port (Default 5060): Enter the port number of the first SIP server, where the device should send SIP requests and expects to receive requests. Proxy server address: The SIP proxy is your VoIP provider's gateway server and the first SIP server, where the device should send SIP requests and expects to receive requests System: Select the type of PBX you use for VoIP provisioning from the option menu.ĭomain: Domain part of the user address (SIP URI) This name is shown in the Provider/PBX listĠ = Automatic 1 = Standard 6 = Broadsoft 10 = Swyx 11 = 3CX Web-interface: Settings - Provider or PBX profilesĬonnection name or number: Name for the provider or PBX profile. Select the synchronization level for the base station. Select the cluster to which the base should be assigned to from the option menu. Web-interface: Settings - Base stations - Synchronization Name / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT networkĠ = Normal power output (Default) 1= Reduce TX power by 8dB for external antenna operationĠ = Base station deactivated 1 = Activated base station (Default) Web-interface: Settings - Base stations - Administration ![]() It is used to identify the device in network communication. Language: Current supported web-interface language is English, German, Russian, Czech, Spanish, French, Italian, Netherlands, Portuguese, Slovenian, Turkey, Greeceĭevice name in the network: Label for the device. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |